Apps Trader Logo

Machinist Calc Pro

Version 10.2.0

Content Rating 12+

User Rating 1 / 5

Votes 1

Machinist Calc Pro

Calculated Industries, Inc.

Utilities, Productivity

IOS
GBP 23.99


Download Machinist Calc Pro on the Appstore





Ideal for machining pros, machine setters, tool and die makers, production engineers, shop managers and shop owners who want to increase productivity and profits in the design, layout and set-up stages of production and reduce wear and tear on costly cutting tools.

And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.

The Machinist Calc Pro is the first machining math and reference tool to provide a complete assortment of machine shop solutions. It has more complete Thread data than the Machinery's Handbook, including step-saving Thread and Drill Size chart look-ups, speeds and feeds, right triangle solutions, bolt patterns and much more.

Spend more time machining and less time looking up specs and data in books, on charts or in computer programs.

FEATURES:
• Created by Calculated Industries, the originator of the award-winning Construction Master calculators
• Built-in help, just press and hold a key
• All the functionality and solutions of the handheld Machinist Calc Pro calculators and optimized for the iPhone device user
• Entry Editing Backspace Key – with a swipe of a finger (left - to - right)
• A complete User’s Guide is available free at www.calculated.com

DEDICATED FUNCTIONS:
• Speeds and Feeds - Calculate for Milling, Turning and Drilling; Spindle Speed (RPM), Feed Rate (IPM), Cut Speed, Cut Feed, Feed per Tooth, Number of Teeth and Radial Chip Thinning adjustment factor
• Thread Size - Enter numeric, fractional or metric thread sizes and display tap, roll tap, close and free fit drill sizes. Display pitch, major and minor diameters
• Drill Point - Enter the cutting angle and Drill Size and calculate the Drill Point cut depth
• Drill Size - Enter numeric, letter, fractional or metric Drill Size and display the closest fitting Drill Size and scroll through available drill sizes
• 3-Wire Measure - Enter Wire Size (or use calculated Best Wire size) and 3-Wire Measurement to calculate pitch diameter
• Trigonometric Functions - Sine, Cosine, Tangent, Arcsine, Arccosine, Arctangent
• Right Triangle Math - Enter, calculate Angle, Hypotenuse, Opposite and Adjacent side lengths

Additional Features:
• Thread Classification Tables
◦U.S.
- Internal (3) 1B, 2B, 3B
- External (3) 1A, 2A, 3A
◦Metric
- Internal (14) 3G-9G and 3H-9H
- External (28) 3g-9g, 3h-9h, 3e-9e, 3f-9f
• U.S. and Metric Unit Entries and Conversions
◦Decimal Inches/mils
◦Feet-Inch-Fractions
◦m, mm, cm
◦Area, Volume and Weight
• Works as a Standard Calculator

TRADEMARKS:
Machinist Calc® is a registered trademark of Calculated Industries, Inc.



Release notes


1. New Menu
2. What's New Pages
3. Units from upper display fixed on tape
4. Misc Backlog bugs



Machinist Calc Pro screenshot oneMachinist Calc Pro screenshot twoMachinist Calc Pro screenshot threeMachinist Calc Pro screenshot four


The Developer Calculated Industries, Inc. also wrote the apps listed below, click the icon to visit the pages.

Construction Master Pro
Construction Master Pro

£23.99
Two in one: the official Construction Master® Pro from Calculated Industries for your iPhone and iPad includes two models: #4065 and #4080 (CM Pro with Trig). And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.

Advanced Feet-Inch-Fraction Construction-Math Calculator by Calculated Industries, built with the same features and functions, and with the same core engine that powers the industry-standard advanced construction-math calculators from Calculated Industries. You’ll actually get two apps in one, since the Construction Master Pro for iPhone has all the functionality of the Construction Master Pro and the Construction Master Pro Trig -– and includes a full User’s Guide built in, as well as the ability to press and hold a key for specific help!

Ideal for Architects, Builders, Contractors, Designers, Draftspersons, Engineers, Framers/Carpenters and Tradesmen

Need to quickly and accurately solve a construction problem when meeting with a client? Left your calculator in the truck? Just pull out your iPhone or iPad, tap on the Construction Master Pro icon, and you’ll have an answer in seconds!

• You get ALL of the functionality of the handheld Construction Master Pro and Construction Master Pro Trig calculators in one powerful, easy-to-use app.
• Solve tough construction-math problems and reduce errors on the jobsite or in the office.
• Reduce costly errors and save time and money. It will help you and your crew on every phase of your projects—estimating, bidding and building.

FEATURES:
• Created by Calculated Industries, the originator of the award-winning Construction Master calculators
• All the functionality and solutions of the handheld Construction Master calculators and optimized for the iPhone/iPod Touch user
• Entry Editing Backspace Key – with a swipe of a finger (left - to - right)
• A complete User’s Guide in English or Spanish is available free at www.calculated.com
• Full trigonometric function: sine, cosine, tangent, arcsine, arccosine and arctangent
• Powerful built-in solutions make it ideal for completing layouts, plans, bids and estimates
• Work in and convert between all building dimensional formats: feet-inch-fractions, inch fraction, yards, decimal feet (10ths, 100ths), decimal inches and metric (m, cm, mm)
• Built-in right angle functions simplify square-ups, rafters, slopes and more

BUILT-IN SOLUTIONS:
Dimensional Math and Conversions
• Feet-Inch-Fraction, Inch Fraction, Yards
• Decimal Feet (10ths, 100ths), Decimal Inches
• Preset Fractions (1/2" through 1/64")
• D:M:S, Decimal Degree Entry and Conversions
• Full Metric Function (m, cm, mm)

Right Angle Solutions
• Complete Right Angle/Rafter Calculations
• Pitch Key (Slope and Grade)
• Rise, Run, Diagonal/Common Rafters
• Hip/Valley Key
• Jack Rafters Key
• Irregular Hip/Valley and Jacks
• Rafter Cutting Angles (Plumb, Cheek and Level Cuts)
• Stair Layout Key
• Stair (Advanced – Riser Limit, Stairwell Opening, Headroom, Floor Thickness)
• Diagonal Key
• Expanded Rake-Wall
• Arched Rake-Wall

Area and Volume Solutions
• Square and Cubic
• Roof – Bundles, Squares, 4x8 Sheets, Pitch, Plan Area
• Drywall, Siding and Paneling 4x8, 4x9 and 4x12
• Column/Cone Area and Volume
• Basic Circular Calculations
• Advanced Circular Calculations
• Weight per Volume Conversions
• Length, Width and Height Keys
• Blocks, Footings

Special Functions
• Trigonometric Function Keys: Sine, Cosine, Tangent, Arcsine, Arccosine, Arctangent
• Board Feet
• Studs: Find number On-center
• User-Definable Preferences
• Cost per Unit (total costs based on unit price)
• Equal-Sided Polygon
• Compound Miters
• Crown Angle
• Advanced Paperless Tape for all functions
• 4 Memories

TRADEMARKS:
Construction Master® is a registered trademark of Calculated Industries, Inc....
Real Estate Master IIIx
Real Estate Master IIIx

£9.99
Residential Real Estate Finance Calculator for Agents, Brokers, Attorneys, Loan Officers and other Mortgage Industry Professionals

The Real Estate Master® IIIx app from Calculated Industries gives Real Estate professionals the power, portability and ease-of-use of the Real Estate Master IIIx on your iPhone or iPad. And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.

Get complete payment solutions with mortgage insurance, amortization, FHA, ARMs, rent vs. buy comparisons and more.

Ideal for new agents and professionals – anyone who doesn’t require buyer qualifying functions:
• Enter loan scenario and quickly solve for PITI and other “what-ifs”
• Compare renting vs. buying costs, including estimated tax savings
• Calculate future values and property appreciation
• Instantly solve your clients’ real estate finance questions
• E-mail loan worksheets to your clients from your iPhone

Built-in functions help you find instant solutions for:
• Complete PITI payments, including FHA
• Amortizations with remaining balances
• Bi-weekly loans and ARMS
• Rent vs. Buy comparisons and estimated tax savings
• Future Value, property appreciation

FEATURES:
• Created by Calculated Industries, the originator of the Real Estate Master and Qualifier Plus Real Estate and mortgage calculators
• Loan terms and payment types can be e-mailed from the app
• Amortization screen lets you see all amortization or loan data at once and e-mail it directly from the app screen on your phone
• Built-in help – just press and hold the desired key for full, clear definitions, explanations and examples of keystrokes

Time-saving Utilities Include:
• Date Math function lets you instantly see closing and expire dates
• Triple Zero key saves time and keystrokes
• Memory Function
• User-Definable Preferences — define and store payments per year, taxes and insurance

Special Functions:
• Entry-editing backspace key – with a swipe of a finger
• Works as a standard calculator
• Free Pocket Reference Guide available at www.calculated.com

TRADEMARKS:
Real Estate Master® is a registered trademark of Calculated Industries, Inc....
Qualifier Plus IIIx/fx
Qualifier Plus IIIx/fx

£19.99
Two in one: the official Qualifier Plus® IIIx from Calculated Industries for your iPhone and iPad includes two models: #3415 and #3430 (Qualifier Plus IIIfx).

And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.

Advanced Residential and Commercial Mortgage Finance Calculator for Agents, Brokers, Investors, Attorneys, Loan Officers and other Mortgage Industry Professionals

The Qualifier Plus® IIIx app from Calculated Industries gives real estate and mortgage professionals the power, portability and ease-of-use of the Qualifier Plus IIIx and Qualifier Plus IIIfx on your iPhone or iPad. Get instant access to P&I, PITI and total loan payments for conventional, FHA and VA loans. Includes complete buyer qualifying and more.

Ideal for all real estate finance professionals including agents, brokers, investors, mortgage lenders, title offices and trainers.

Need answers to both common and advanced real estate finance problems? Just pull out your iPhone or iPad, tap on the Qualifier Plus icon, and you’ll have the answers for your client in seconds.

• Complete Cash Flow solutions including Internal Rate of Return, Net Present Value and Net Future Value
• Qualifying keys provide on-the-spot buyer qualifying for conventional, FHA and VA loans
• Instantly solve your clients’ real estate finance questions
• E-mail loan worksheets to your clients from your iPhone

Built-in functions help you find instant solutions for:
• Calculate IRR for multiple cash flows
• Amortizations with remaining balances
• Bi-weekly loans and ARMS
• Rent vs. Buy comparisons and estimated tax savings
• Future Value, property appreciation

FEATURES:
• Created by Calculated Industries, the originator of the Real Estate Master and Qualifier Plus Real Estate and mortgage calculators
• Amortization screen lets you see all amortization or loan data at once and e-mail it directly from the app screen on your phone
• Built-in help – just press and hold the desired key for full, clear definitions, explanations and examples of keystrokes

Time-saving Utilities Include:
• Date Math function lets you instantly see closing and expire dates
• Triple Zero key saves time and keystrokes
• Memory Function
• User-Definable Preferences — define and store payments per year, taxes and insurance

Special Functions:
• Entry-editing backspace key – with a swipe of a finger
• Works as a standard calculator
• Free User Guide available at www.calculated.com

TRADEMARKS:

TRADEMARKS:
Qualifer Plus® is a registered trademark of Calculated Industries, Inc....
ElectriCalc Pro
ElectriCalc Pro

£28.99
The official US-based National Electrical Code® (NEC) ElectriCalc® Pro from Calculated Industries for iOS is a full-featured emulation of our popular #5065/#5070 models.

And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.

In addition to built-in help, the ElectriCalc Pro electrical code calculator is fully compliant with 2017, 2014, 2011, 2008, 2005, 2002, 1999, and 1996 NEC®.

Electrical Contractors, Designers, Electricians and Lighting Specialists solve tough electrical calculations in seconds and deliver those solutions in conformance with the latest NEC®.

The ElectriCalc Pro is a complete electrical reference tool that will save time, trouble and money.

FEATURES:
•All the functionality and solutions of the handheld ElectriCalc Pro calculator and optimized for the iPhone/iPod Touch user
•Built-in help – just press and hold the desired key for full, clear definitions, explanations and examples of keystrokes
•A complete User’s Guide is available free at (go to ElectriCalc Pro support link below)
•Swipe left to right to edit an entry (backspace)

ElectriCalc Pro Solutions:
•Wire Sizes
•Voltage Drop
•Conduit Sizing
•Motor Full-Load Amps
•Fuse and Breaker Sizes
•NEC® Table Number displayed when performing Wire Size calculations
•Service and Equipment Grounding Conductor Sizes
•Enter BTU to find Kilowatts per Hour
•Enter Kilowatts per Hour to find BTU
•Parallel Resistance
•Ohm’s Law Calculations – enter any two values to solve for the third
•Circular MILS wire sizes
Description of ElectriCalc Pro Calculations:
•Work directly in and convert between Amps, Watts, Volts, Volt-Amps, kVA, kW, PF% and EFF% and DC Resistance
•Calculate wire sizes per NEC® 310-16 and 310-17; Copper or aluminum, 3Ø/1Ø, 60°C, 75°C, 90°C insulation ratings and 100% or 125% of ampacity. Can also adjust wire sizes for ambient temperatures other than 30◦ C and for more than three wires in a raceway
•Integrated voltage drop solutions. Find minimum VD wire size, maximum Length for any given wire size, drop percentage, actual number and percentage of Volts dropped
•Conduit sizing for 12 types of conduit. Per 2005 and 2008 NEC® Table C1-C12, find sizing of all common conduits for any combination for #THW, #XHHW and # THHN wires. Plus, gives fill percentages, cross-sectional areas, remaining areas and more
•Find Motor Full-Load Amps per current NEC®. Works in 1Ø and 3Ø with the new expanded tables for 3Ø induction (to 500 hp) synchronous (to 200 hp) and DC motors per NEC® 430-247, 430- 248 and 430-250.
•Calculates Fuse and Breaker Sizes. Solves fuse and breaker sizes per NEC® 430-52
•Parallel and derated wire sizing
•Parallel Resistance
•NEC Table number displays when performing Wire Size calculations
•Sizes overload protection per NEC® 430-32
•Automatically finds NEMA starter sizes.
•Calculates service and equipment grounding conductor sizes per NEC® 250-122 and 250-66; plus works directly in electrical terms.
•Enter BTU to find Kilowatts per Hour
•Enter Kilowatts per Hour to find BTU
•Ohm’s Law Calculations – enter any two values to solve for the third.
•Enter, solve or convert to Circular MILS wire sizes

Note: Electrical math is universal, however, code-based sizing solutions are based on the US National Electrical Code® (NEC); users in other countries should check with their local Code Officials for applicability.

TRADEMARKS:
ElectriCalc® is a registered trademark of Calculated Industries, Inc....
Machinist Calc Pro
Machinist Calc Pro

£23.99
Ideal for machining pros, machine setters, tool and die makers, production engineers, shop managers and shop owners who want to increase productivity and profits in the design, layout and set-up stages of production and reduce wear and tear on costly cutting tools.

And while perhaps obvious, if you change from an iOS device to a non-iOS device, you WILL need to buy a new license as they are incompatible.

The Machinist Calc Pro is the first machining math and reference tool to provide a complete assortment of machine shop solutions. It has more complete Thread data than the Machinery's Handbook, including step-saving Thread and Drill Size chart look-ups, speeds and feeds, right triangle solutions, bolt patterns and much more.

Spend more time machining and less time looking up specs and data in books, on charts or in computer programs.

FEATURES:
• Created by Calculated Industries, the originator of the award-winning Construction Master calculators
• Built-in help, just press and hold a key
• All the functionality and solutions of the handheld Machinist Calc Pro calculators and optimized for the iPhone device user
• Entry Editing Backspace Key – with a swipe of a finger (left - to - right)
• A complete User’s Guide is available free at www.calculated.com

DEDICATED FUNCTIONS:
• Speeds and Feeds - Calculate for Milling, Turning and Drilling; Spindle Speed (RPM), Feed Rate (IPM), Cut Speed, Cut Feed, Feed per Tooth, Number of Teeth and Radial Chip Thinning adjustment factor
• Thread Size - Enter numeric, fractional or metric thread sizes and display tap, roll tap, close and free fit drill sizes. Display pitch, major and minor diameters
• Drill Point - Enter the cutting angle and Drill Size and calculate the Drill Point cut depth
• Drill Size - Enter numeric, letter, fractional or metric Drill Size and display the closest fitting Drill Size and scroll through available drill sizes
• 3-Wire Measure - Enter Wire Size (or use calculated Best Wire size) and 3-Wire Measurement to calculate pitch diameter
• Trigonometric Functions - Sine, Cosine, Tangent, Arcsine, Arccosine, Arctangent
• Right Triangle Math - Enter, calculate Angle, Hypotenuse, Opposite and Adjacent side lengths

Additional Features:
• Thread Classification Tables
◦U.S.
- Internal (3) 1B, 2B, 3B
- External (3) 1A, 2A, 3A
◦Metric
- Internal (14) 3G-9G and 3H-9H
- External (28) 3g-9g, 3h-9h, 3e-9e, 3f-9f
• U.S. and Metric Unit Entries and Conversions
◦Decimal Inches/mils
◦Feet-Inch-Fractions
◦m, mm, cm
◦Area, Volume and Weight
• Works as a Standard Calculator

TRADEMARKS:
Machinist Calc® is a registered trademark of Calculated Industries, Inc....